BULK PRICES – Customers inside the European Union also pay VAT at 20% on the prices below.

You can see the final cost of the volume breaks by adding the parts to your cart.

THONKICONN

Thonkiconn Jack Datasheet

Thonkiconn Eagle v6 Library Part – thonkiconn.lbr

Thonkiconn Eagle v5.7+ Library Part – thonkiconn_eagle_v5.lbr

Thonkiconn (PJ301M-12) is a new vertical mount 3.5mm switching mono phone jack.

The mechanism is identical to the ‘Erthenvar’ jack type (PJ301BM), it’s primary purpose is as a direct replacement of the popular Kobiconn 3.5mm jack but with a 100% vertically integrated footprint, i.e. no perpendicular ground pin. A really great bonus of these parts is they fit neatly into breadboard/stripboard/veroboard.

All materials used are RoHS compliant.

NOTE: Please refer to the notes about the PCB HOLE in the Thonkiconn Jack Datasheet.
It is advisable to drill a 3mm hole in the PCB directly under the jack barrel centre or avoid routing traces or ground plane in that area.

 PJ301BM

Known commonly as ‘Flight of Harmony’ or ‘Erthenvar’ jacks, this popular component is a vertical mount 3.5mm switching phone jack with a threaded metal bushing.

This is the latest version of the part, redeveloped by the manufacturer in November 2012 to provide very reliable switch contacting.

Material:PBT housing, beryllium copper spring, brass curve piece.

• Temperature Range: -30 deg c~70 deg c?
• Rated Current:0.5A
• Contact Resistance:0.03 Ohm
• Rated Voltage:30V AC/DC
• Test Voltage:500V/60s
• Insulation Resistance: 100MOhm
• Insertion Force:5-20N
• Withdrawal Force:4-20N

PJ301CM

PJ302M

The PJ302M is a  horizontal or right angled mount 3.5mm switching mono phone jack.

It can simply be converted to a non switching jack as shown below. Various euro modules use these jacks, including the 4ms RCD and SCM modules.

All materials used are RoHS compliant.