This small board is designed for you to easily power your breadboard with the common Eurorack voltages – directly from the bus in your case. The kit includes the PCB and all the parts necessary to supply voltages of -12V, + 12V and + 5V into your breadboard and it is possible to power the board from a 10 or 16 pin ribbon cable. In addition to reverse polarity protection diodes and power filtering capacitors, a point of connection to ground has been also added to solder a terminal to connect an oscilloscope or multimeter.
**THONK IS NOT LIABLE FOR ANY DAMAGE CAUSED TO YOURSELF OR YOUR EQUIPMENT WHILE USING THIS PRODUCT. PLEASE MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE YOU PURCHASE AND USE THIS PRODUCT.